Dear Jane, triangle BR6 Frank's Rickrack

Pleased with the use of the large print here, I particularly looked for a design which would showcase the material. 

I used Foundation paper piercing for the streps at the side.

For the centre I cut this using my dear Jane triangle to ensure I got the best use of the pattern

I then added this also paper piercing and joined the second set of steps

Before joining both I trimmed the pieces using the template which is still attached 

Then adding the small tip to the triangle 

As seen below

Then I cut the neutral tip of the triangle, I cut it larger than the pattern so I could trim afterwards 

 I joined that at the bottom, remember a snip into the seam line on the triangle you are adding

Pin and pierce

And then press and trim using dear Jane triangle

I then appliquéd the two smaller pieces aligning at the tip